Everything
a tower needs.
A gateway in the control cabinet, a camera on the platform, a new screen at the entrance, and the platform that connects them. Designed by us to work together.


The brain of the parking tower.
Compact and built in aluminium, the FLUX Gateway lives inside the control cabinet. It speaks the controller's own language and turns every change in the machine into live, secure data.
Fewer call-outs
Diagnose and clear routine faults from the office instead of sending a two-person crew.
Faster response
You hear about a fault the moment the controller reports it, not when someone phones.
No changes to the machine
Fits inside the existing cabinet and uses the controller's own serial port.
Reads the PLC directly
Machine states, positions and alarm codes over RS-232/485. No extra sensors needed.
Acts only with approval
Resets and commands run only after an operator approves them and the safety checks pass.
Steps aside if it fails
If the gateway loses power, a relay connects the panel straight back to the PLC.
Secure from the first boot
Its own X.509 identity, a hardware secure element and encrypted MQTT.
Updates itself safely
Over-the-air updates roll out in stages and roll back on their own if anything looks wrong.
Compatibility
- Mechanical parking towers with serial PLCs (RS-232 / RS-485)
- LS Master-K and Modbus RTU today. Other PLC families through protocol adapters, assessed per project.
- Connects to the cloud over the site's existing Ethernet or Wi-Fi
Specifications
| Compute | Quad-core ARM Cortex-A76, industrial carrier board |
|---|---|
| PLC interface | RS-232 / RS-485 serial |
| Protocols | LS Master-K, Modbus RTU. Others on request. |
| Network | Ethernet, Wi-Fi |
| Power | DC 9–36 V (12 / 24 V compatible), power-loss hold-up |
| Operating temp. | −10 to +55 °C |
| Enclosure | Aluminium, approx. 130 × 110 × 72 mm |
| Mounting | DIN rail or wall bracket (optional) |
| Security | Secure element, X.509 certificates, TLS, hardware watchdog |
| Updates | A/B over-the-air, staged rollout, automatic rollback |
Preliminary specification. Subject to change.

Eyes on every platform.
Nobody should press a remote button without seeing what is on the platform. FLUX Vision gives operators a live view they can steer, and records the moment before and after every remote action.
Pilot module. AI features in development.
See before you act
A live picture of the platform before every remote command.
A record of every action
Before and after images of every remote action, for audits and disputes.
Ready for AI
Designed for on-device vehicle detection and licence-plate recognition.
Features
- Live view with pan and tilt
- A visual check is required before any remote command
- Coming next: vehicle detection and licence-plate recognition
Specifications
| Function | Live video, pan and tilt |
|---|---|
| Works with | FLUX Gateway and Operator Console |
| Recording | Before and after capture for every remote action |
| AI roadmap | Vehicle detection, licence-plate recognition (in development) |

A new face for the parking tower.
An Android-based panel that replaces ageing operator screens. Clear for drivers, configurable from anywhere and ready to show your own content.
Availability on request.
A better first impression
Clear instructions for drivers instead of a cryptic old panel.
Managed from anywhere
Screens, languages and content are updated over the air.
A new place for content
Ready to show your own messages while the car is on its way down.
Features
- 15.6" high-brightness display, IP65 front (reference design)
- Modbus TCP and LS XGT connectivity
- Screens and content updated remotely
- Safety stays with the PLC, where it belongs
Specifications
| Display | 15.6" high-brightness, optically bonded (reference design) |
|---|---|
| Front protection | IP65 (reference design) |
| Platform | Android-based industrial panel PC |
| Connectivity | Modbus TCP, LS XGT, RS-485 / RS-232, Ethernet |
| Safety concept | Non-safety HMI. Safety functions remain in the PLC. |
Every tower you run, on one screen.
Owners see how their tower is doing. Operators see every site, every alarm and every technician. Both work from the same live data.



Owner App
Know before your tenants do.
- Live status of every bay and machine
- An alert the moment something goes wrong
- Service history and open tickets
- Invoices and monthly reports
Operator Console
Fix more without leaving the office.
- Every site on one dashboard
- Alarm triage and remote resolution
- Work orders and technician dispatch
- Firmware updates across the fleet
The whole fleet at a glance
Every site, every unit and every alarm, live on one screen.
Remote control you can trust
Approval steps, session locks and a camera check for every remote action.
Data that pays for itself
Incident history and analytics that support service contracts and planning.
Specifications
| Delivery | Cloud software. Web apps for desktop, tablet and mobile. |
|---|---|
| Device link | MQTT over TLS, X.509 identity for every device |
| Users | Owners, operators and field technicians, each with their own access |
| Updates | Over-the-air updates across the fleet, rolled out in stages |
| Integration | Open API. Partner integrations on request. |
| Pricing | Subscription per parking bay. Partner pricing on request. |